Specifications

Chapter 3: Administration and setup
collection.vmware.skip_storagepath_samples
If the value of this property is set to true, the storagePath related samples
will not be collected in a VMware environment. Turning off the collection of
storagePath samples results in improved performance.
List of properties that may not be edited
The following list contain system properties that should NOT be modified unless
you are instructed to by SolarWinds Technical Support.
Resource Depletion Percent Threshold
Default setting for the resource depletion calculations. Changing this value
results in alerts on resource depletion at the specified percentage instead of
the default 100%.
fitment.memory.waste
Default setting for capacity planning. This should not be changed because
this field is editable in the capacity planning section of SolarWinds
Virtualization Manager.
How many days to use for Resource Depletion
Default setting for capacity planning. This should not be changed because
this field is editable in the capacity planning section of SolarWinds
Virtualization Manager.
fitment.memory.oversub
Default setting for capacity planning. This should not be changed because
this field is editable in the capacity planning section of SolarWinds
Virtualization Manager.
fitment.sizing.target
Default setting for capacity planning. This should not be changed because
this field is editable in the capacity planning section of SolarWinds
Virtualization Manager.
90