Specifications

After saving a new Trap Host, click Send Test Trap to test the integration.
SNMP trap receivers may need details of the Manager alert MIB (Management
Information Base). Click MIB to view the entire SolarWinds Virtualization
Manager MIB.
Configuring authentication servers
In the Authentication Server configuration page you can configure the Active
Directory servers (Domain Controller), or LDAP servers that are used to
authenticate Active Directory (AD) or LDAP users.
You can configure multiple authentication servers, based on the domain prefix
you specify. You can configure a default domain entry, or configure an entry for
each domain prefix.
Virtualization Manager also supports the use of mixed mode authentication.
Adding an Active Directory authentication server
To add an Active Directory authentication server, perform the following steps:
1. Click Add.
2. From the Authentication Type list, select Active Directory.
3. If you want this to be the authentication server for users who log in to
Virtualization Manager without specifying a domain prefix, click Use for all
accounts where a domain is not specified.
4. If you want this to be the authentication server for users who specify a
domain prefix, click Use for this domain only, and then enter the specific
domain in the text field. The domain name prefix is case-sensitive.
5. In the Server field, type the IP address of the Active Directory server.
6. In the Port field, type the port used for AD authentication. The default port is
389.
7. Optionally, provide a description for the Active Directory server.
85
Configuring authentication servers