Specifications

Chapter 3: Administration and setup
3. Enter the Network address and Mask for your new inclusion list.
4. Click Save.
You can add as many filters as you want to include multiple ranges of IP
addresses.
Using labels
The Labels configuration page provides you with a quick way of creating a series
of custom labels that you can apply to VMs and hosts.
To create a label, click Add Label.
For more information, see Custom labels.
Configuring SNMP
SolarWinds Virtualization Manager can send SNMP traps for events that occur in
the system such as the following:
l New VMs are discovered
l Alerts are raised or lowered
To configure SNMP traps, click SNMP Configuration.
To specify a new host that will receive SNMP traps, click Add Trap Host. Enter
the following information to configure a new SNMP integration.
l Host Address: The IP address or FQDN of the receiver of SNMP alerts.
l Community String: The SNMP community string which is used for read-
only access to SolarWinds Virtualization Manager alerts.
l UDP Port: The port the SNMP receiver expects SNMP UDP traffic.
l Retries: The number of times to resend the SNMP trap if no
acknowledgment is received.
l Timeout (ms): The amount of time to wait for acknowledgment before
attempting a retry.
84