Specifications

Chapter 2: Installing SolarWinds Virtualization Manager
11. Click OK.
12. Start the VM.
13. Right-click the virtual appliance in the inventory, and then click Connect.
14. Select Set Timezone and ensure that the appliance is set to the same time
zone as the Hyper-V host server.
15. Use the arrow keys to select Configure Network, and then press enter.
16. If you use DHCP to determine the IP address of the appliance, type 'y' when
prompted with the "Use a DHCP Server instead of a static IP address?"
question.
17. If you use a static IP address, complete the following steps:
a. Type 'n' when prompted with the "Use a DHCP Server instead of a
static IP address?" question.
b. Enter the static IP of the virtual appliance.
c. Enter the net mask.
d. Enter the gateway.
e. Enter the DNS Server 1.
f. Enter the DNS Server 2.
g. Enter a host name to use for the virtual appliance.
18. Enter proxy server information if necessary.
19. Type 'y' when prompted with the "Is this correct?" question.
20. Open a browser to http://IPaddress, where IPaddress is the address
shown in the console.
21. Log in, and then accept the End User License Agreement. The default
account is admin with the password admin.
40