Specifications

To verify the credentials, perform the following steps:
1. Log on to Virtualization Manager as an administrator.
2. Navigate to Setup > Credentials.
3. Select the Hyper-V credentials.
4. Click Edit.
5. Ensure that the user name, password, and domain are entered correctly.
6. Click Save.
Testing the connection between the Hyper-V host and
Virtualization Manager
Testing the connection between the Hyper-V host and Virtualization Manager
ensures that Virtualization Manager can connect to and gather relevant data from
the Hyper-V host.
You can test the connection by creating a discovery job specifically for each
target Hyper-V host. Run the discovery job after each change to test the
connection.
Note: If you use different credentials for different hosts, you can request a domain
administrator account to perform these tests.
Adding a new discovery job
To add a new discovery job, perform the following steps:
1. Log on to Virtualization Manager as an administrator.
2. Navigate to Setup > Credentials.
3. Ensure that the correct Hyper-V credentials are entered. Each credential
must be added separately.
4. Navigate to Setup > Data Sources.
5. Click Add.
6. Click Add Hyper-V hosts.
285
Testing the connection between the Hyper-V host and Virtualization Manager