Specifications

17 Deploying VMware vCenter Site Recovery Manager with NetApp FAS/V-Series Storage Systems
3. The protection-side array will be listed at the bottom of the Configure Array Managers window, along
with the discovered peer array. The destination of any SnapMirror relationships is listed here, including
a count of replicated LUNs discovered by SRM.
4. Click Next and configure recovery-side array managers in the same fashion.
Click the Add… button and enter the information for the NetApp controller at the DR site. If you have
additional NetApp controllers at the DR site, add these controllers here as well. If you are adding
MultiStore vFilers, each vFiler must be added separately as an array.
IP addresses on the recovery site NetApp array, which are used to serve NFS to the ESX hosts at the
DR site, are entered with a comma separating each address in the NFS IP Addresses field. This is the
recovery site array, so SRM will mount NFS datastores on these addresses for DR test and failover.