User`s guide
VMware ThinApp Reviewer’s Guide
REVIEWER’S GUIDE / 13
ClickEditPackageini
Modifyaparameterbyremovingthesemicolonatthebeginningofthelineorbyeditingexisting
parameters
RemoveSandboxOnExitparameterbydeletingthesemicolonatthebeginning
ofthelinesothatRemoveSandboxOnExit=1isenabledinPackage.ini
Modifyanyadditionalparametersandsavethefile
Buildtocompletetheprocessandgeneratethe
ThinApppackage
Subsequent sections will refer to several Package.ini modifications. When making changes to these
parameters, you first change the Package.ini, then rebuild the package to embed the administratively
project folder and running the build.bat file.
Enabling ThinApp Packages Created Prior to ThinApp 4.7 for
Horizon Application Manager
If you have a ThinApp package captured and built prior to ThinApp 4.7, and you want to use that package with
Horizon Application Manager, you need to recapture and then rebuild the application with ThinApp 4.7.
The ThinApp 4.7 capture process has some internal changes; to integrate those changes, you need to recapture
your application. If you simply add the new ThinApp 4.7 parameters to the Package.ini file for the pre-4.7
package, and then rebuild with ThinApp 4.7, the package may not work as expected. If you both recapture and
rebuild the pre-4.7 ThinApp package, you ensure that the package will be fully enabled for Horizon.
Harvesting Internet Explorer 6 and Using ThinDirect with Setup Capture
without actually installing the application. The following procedure outlines the steps to do this.
VirtualizingInternetExplorerwithThinApp