User guide

Setting Value
- -
Port (default is 8080)
Credentials for the root account on the Isilon
array
Collect VNX file configuration information
You need to supply certain configuration information when adding VNX File storage to the
ViPR virtual appliance.
Before you begin
You need access to the required VNX File information.
Procedure
1. Obtain the following information:
Setting Value
- -
Control Station IPv4 address
Port (default is 443)
Credentials for an account with administrator
privileges on the array (default nasadmin/
nasadmin)
IP address and credentials for the onboard SMI-
S Provider that runs on the control system
(default admin/#1Password)
Collect VPLEX information
When you add VPLEX storage to ViPR you need to supply certain configuration
information and credentials information for use during setup.
Before you begin
You need access to the required VPLEX information.
Procedure
1. Collect the following information:
Setting
Value
- -
IPv4 address
Port (default is 443)
Credentials for an account with administrator
privileges on the array
Initial Configuration of ViPR Virtual Appliance
Collect VNX file configuration information 37