User guide

vipradmin ALL=(ALL) VIPRMGMT
Collect information for ViPR Controller VM virtual machines
When you deploy ViPR you need to supply an IP address for each Controller VM.
Procedure
1. Record the IP addresses needed for deployment.
ViPR can be deployed in a configuration of 3 or 5 Controller VMs. Use a unique, static
IPv4 address for each Controller VM. All IP addresses must be IPv4, except for the
public virtual IP address, which can have an IPv4 address, IPv6, or both.
Host role IP address
- -
Controller VM 1
Controller VM 2
Controller VM 3
Controller VM 4
Controller VM 5
Public virtual IP address (can be IPv4 or IPv6 or
both)
IPv6 prefix length (if IPv6 is used for Public
virtual IP address)
IPv6 default gateway (if IPv6 is used for Public
virtual IP address)
Network netmask
Network gateway
DNS servers (2 or 3 required)
NTP servers (2 or 3 required)
Prerequisites
18 EMC ViPR 1.1.0 Installation and Configuration Guide