7.0

Table 7‑1. Worksheet: Configuration Options for Creating a Manual Desktop Pool (Continued)
Option Description Fill In Your Value Here
Desktop Pool Settings Settings that determine the machine state, power
status when a virtual machine is not in use,
display protocol, Adobe Flash quality, and so on.
For details, see “Desktop Pool Settings for All
Desktop Pool Types,” on page 135.
For a list of the settings that apply to manual
pools, see “Desktop Pool Settings for Manual
Pools,” on page 93.
Transparent Page Sharing Scope Select the level at which to allow transparent
page sharing (TPS). The choices are Virtual
Machine (the default), Pool, Pod, or Global. If
you turn on TPS for all the machines in the pool,
pod, or globally, the ESXi host eliminates
redundant copies of memory pages that result if
the machines use the same guest operating
system or applications.
Page sharing happens on the ESXi host. For
example, if you enable TPS at the pool level but
the pool is spread across multiple ESXi hosts,
only virtual machines on the same host and
within the same pool will share pages. At the
global level, all machines managed by View on
the same ESXi host can share memory pages,
regardless of which pool the machines reside in.
NOTE The default setting is not to share memory
pages among machines because TPS can pose a
security risk. Research indicates that TPS could
possibly be abused to gain unauthorized access
to data in very limited configuration scenarios.
Create a Manual Desktop Pool
You can create a manual desktop pool that provisions desktops from existing virtual machines or physical
computers. You must select the machines that will be included in the desktop pool.
For manual pools with virtual machines that are managed by vCenter Server, View ensures that a spare
machine is powered on so that users can connect to it. The spare machine is powered on no matter which
power policy is in effect.
Prerequisites
n
Prepare the machines to deliver remote desktop access. In a manual pool, you must prepare each
machine individually. Horizon Agent must be installed and running on each machine.
To prepare virtual machines managed by vCenter Server, see Chapter 3, “Creating and Preparing a
Parent Virtual Machine for Cloning,” on page 19.
To prepare unmanaged virtual machines and physical computers, see Chapter 2, “Preparing
Unmanaged Machines,” on page 15.
n
Gather the configuration information that you must provide to create the pool. See “Worksheet for
Creating a Manual Desktop Pool,” on page 89.
n
Decide how to configure power settings, display protocol, Adobe Flash quality, and other settings. See
“Desktop Pool Settings for All Desktop Pool Types,” on page 135.
Procedure
1 In View Administrator, select Catalog > Desktop Pools.
Chapter 7 Creating Manual Desktop Pools
VMware, Inc. 91