6.0.2

n
Appropriate hardware. For example, VMware recommends a 10GB NIC and at least one SSD and one
HDD for each capacity-contributing node. For specifics, see the VMware Compatibility Guide.
n
A cluster of at least three ESXi hosts. You need enough ESXi hosts to accommodate your setup. For
more information, see the vSphere Configuration Maximums document, available from
https://www.vmware.com/support/pubs/vsphere-esxi-vcenter-server-pubs.html.
n
SSD capacity that is at least 10 percent of HDD capacity.
n
Enough HDDs to accommodate your setup. Do not exceed more than 75% utilization on a magnetic
disk.
For more information about Virtual SAN requirements, see "Working with Virtual SAN" in the vSphere
Storage document. For guidance on sizing and designing the key components of View virtual desktop
infrastructures for VMware Virtual SAN, see the white paper at
http://www.vmware.com/files/pdf/products/vsan/VMW-TMD-Virt-SAN-Dsn-Szing-Guid-Horizon-
View.pdf.
Default Storage Policy Profiles for Virtual SAN Datastores
When you use Virtual SAN, View defines virtual machine storage requirements, such as capacity,
performance, and availability, in the form of default storage policy profiles, which you can modify. Storage
is provisioned and automatically configured according to the assigned policies.
The default policies that are created during desktop pool creation depend on the type of pool you create.
The names of the policies are OS_DISK (for operating system files), PERSISTENT_DISK (for user data files),
REPLICA_DISK (for replicas), and VM_HOME (for virtual machine files such as .vmx and .vmsn files). For
example, a REPLICA_DISK policy is created only for linked-clone pools. Changes to the policy are
propagated to newly created virtual machines and to all existing virtual machines in the desktop pool.
Virtual SAN offers a storage policy framework so that you can control the behavior of various virtual
machine objects that reside on the Virtual SAN datastore. An example of an object in Virtual SAN is a
virtual disk (VMDK) file, and there are four characteristics of each object that are controlled through policy:
n
Stripes: Number of stripes of data. The number of disk stripes affects how many magnetic disks you
have (HDDs).
n
Resiliency: Number of failures to tolerate. The number of host failures to tolerate depends, of course,
on the number of hosts you have.
n
Storage Provisioning: Thick or Thin.
n
Cache Reservation: Read-cache reservation.
The stripes and cache reservation settings are used to control performance. The resiliency setting controls
availability. The storage provisioning setting control capacity. These settings, taken together, affect how
many vSphere hosts and magnetic disks are required.
For example, if you set the number of disk stripes per object to 2, Virtual SAN will stripe the object across at
least 2 HDDs. In conjunction with this setting, if you set the number of host failures to tolerate to 1, Virtual
SAN will create an additional copy for resiliency and therefore require 4 HDDs. Additionally, setting the
number of host failures to tolerate to 1 requires a minimum of 3 ESXi hosts, 2 for resiliency and the third to
break the tie in case of partitioning.
NOTE If you inadvertently attempt to use settings that contradict each other, when you attempt to apply the
settings, the operation will fail, and an error message will tell you, for example, that you do not have
enough hosts.
There is no requirement for any user action associated with these default policies. Policies are created for
both linked-clone desktop pools and full-clone desktop pools.
Setting Up Desktop and Application Pools in View
184 VMware, Inc.