7.0

Table 3‑3. REST API Properties for the EdgeServiceSettings resource (Continued)
REST API Property Description and Example Default Value
authMethods
Specifies the type of authentication to use. Set
this property to one of the following values
unless you want to use pass-through
authentication:
n
sp-auth, the default, means that
authentication is passed through to the
service provider (Horizon server).
n
certificate-auth means smart card
authentication is mandatory.
n
certificate-auth || sp-auth means
smart card authentication is optional. If a
smart card is not used, pass-through
authentication is used.
n
radius-auth && sp-auth means
RADIUS two-factor authentication is used
followed by pass-through.
n
securid-auth && sp-auth means RSA
SecurID authentication is used followed
by pass-through.
n
saml-auth means SAML authentication
is used.
n
saml-auth || sp-auth means SAML
authentication is optional. If SAML
authentication is not used, pass-through
authentication is used.
By default, authentication is
passed through to the Horizon
server, which can be configured
for AD password, RSA SecurID,
RADIUS, or SAML.
authCookie
Specifies an authentication cookie name. None
Edge Service Settings for View
These settings are included in the EdgeServiceSettings resource. Use this edge service to configure
Access Point to point to a server that uses the View XML protocol, such as View Connection Server, Horizon
Air, or Horizon Air Hybrid-mode. The REST API URL is https://access-point-appliance.example.com:
9443/rest/v1/config/edgeservice/view In this URL, access-point-appliance.example.com is the fully qualified
domain name of the Access Point appliance.
Table 3‑4. REST API Properties for the EdgeServiceSettings Resource for View
REST API Property Description and Example Default Value
tunnelEnabled
Specifies whether the View secure tunnel is
enabled.
FALSE
NOTE If you use VMware OVF
Tool to specify a value for the
proxyDestinationUrl
property, tunnelEnabled is set
to TRUE.
tunnelExternalUrl
Specifies an external URL of the Access Point
appliance, which clients will use for tunnel
connections through the View Secure
Gateway. This tunnel is used for RDP, USB,
and Multimedia Redirection (MMR) traffic.
https://appliance:443
(appliance is the fully qualified
domain name of the
Access Point appliance.)
pcoipEnabled
Specifies whether the PCoIP Secure Gateway
is enabled.
FALSE
NOTE If you use VMware OVF
Tool to specify a value for the
proxyDestinationUrl
property, pcoipEnabled gets set
to TRUE.
Deploying and Configuring Access Point
36 VMware, Inc.