6.1

Procedure
1 In View Administrator, select View Configuration > Servers.
Option Action
View Connection Server instance
Select the View Connection Server instance on the Connection Servers tab
and click Edit.
Security server
Select the security server on the Security Servers tab and click Edit.
2 Type the secure tunnel external URL in the External URL text box.
The URL must contain the protocol, client-resolvable host name and port number.
For example: https://view.example.com:443
NOTE You can use the IP address if you have to access a View Connection Server instance or security
server when the host name is not resolvable. However, the host that you contact will not match the SSL
certificate that is configured for the View Connection Server instance or security server, resulting in
blocked access or access with reduced security.
3 Type the PCoIP Secure Gateway external URL in the PCoIP External URL text box.
Specify the PCoIP external URL as an IP address with the port number 4172. Do not include a protocol
name.
For example: 10.20.30.40:4172
The URL must contain the IP address and port number that a client system can use to reach this security
server or View Connection Server instance.
4 Type the Blast Secure Gateway external URL in the Blast External URL text box.
The URL must contain the HTTPS protocol, client-resolvable host name, and port number.
For example: https://myserver.example.com:8443
By default, the URL includes the FQDN of the secure tunnel external URL and the default port number,
8443. The URL must contain the FQDN and port number that a client system can use to reach this host.
5 Verify that all addresses in this dialog allow client systems to reach this host.
6 Click OK to save your changes.
The external URLs are updated immediately. You do not need to restart the View Connection Server service
or the security server service for the changes to take effect.
Join or Withdraw from the Customer Experience Program
When you install View Connection Server with a new configuration, you can choose to participate in a
customer experience improvement program. If you change your mind about participating after the
installation, you can join or withdraw from the program by using View Administrator.
If you participate in the program, VMware collects anonymous data about your deployment in order to
improve VMware's response to user requirements. No data that identifies your organization is collected.
To review the list of fields from which data is collected, including the fields that are made anonymous, see
“Information Collected by the Customer Experience Improvement Program,” on page 104.
Procedure
1 In View Administrator, select View Configuration > Product Licensing and Usage.
2 In the Customer Experience Program pane, click Edit Settings.
Chapter 2 Configuring View Connection Server
VMware, Inc. 37