User manual
Table Of Contents
Connecting to Remote Desktops and
Applications 3
You can use Horizon Client to connect to remote desktops and applications.
This chapter includes the following topics:
n
“Connect to a Remote Desktop or Application,” on page 9
n
“Trust a Self-Signed Root Certicate,” on page 10
n
“Use Unauthenticated Access to Connect to Remote Applications,” on page 11
n
“Log O or Disconnect,” on page 12
Connect to a Remote Desktop or Application
Use your Active Directory credentials to connect to the remote desktops and applications that you are
authorized to use.
Prerequisites
n
Obtain login credentials, such as an Active Directory user name and password, RSA SecurID user name
and passcode, or RADIUS authentication user name and passcode.
n
Obtain the NETBIOS domain name for logging in. For example, you might use mycompany rather than
mycompany.com.
Procedure
1 In the Login dialog box, if you are prompted for RSA SecurID credentials or RADIUS authentication
credentials, enter the user name and passcode, and click Login.
The passcode might include both a PIN and the generated number on the token.
2 If you are prompted a second time for RSA SecurID credentials or RADIUS authentication credentials,
enter the next generated number on the token.
Do not enter your PIN and do not enter the same generated number entered previously. If necessary,
wait until a new number is generated.
If this step is required, it is required only when you mistype the rst passcode or when conguration
seings in the RSA server change.
VMware, Inc.
9