Installation and Setup Guide

Setting the Time Zone
The time zone used in a remote desktop or application is automatically set to the time zone in your local
system. However, when using the HTML Access client, if the time zone cannot be correctly determined
due to certain daylight saving policies, you might need to set the time zone manually.
To manually set the correct time zone information to use before you connect to a remote desktop or
application, click the Settings toolbar button in the upper-right corner of the desktop and application
selector screen. Turn off the Set Time Zone Automatically option in the Settings window and select one
of the time zones from the drop-down menu.
The value you selected is saved as your preferred time zone to use when connecting to a remote desktop
or application.
If you are already connected to a remote desktop or application, return to the desktop and application
selector screen to change the current time zone setting.
The Set Time Zone Automatically option is not available from the Settings window that is accessible
from the sidebar.
Note When using the Chrome browser on an Android system, if the Set Time Zone Automatically
option is set to true and you change the Android system's time zone, the new time zone is not
automatically synchronized with the remote desktop. This is a Chrome limitation on the Android system.
You must restart the Android and the Chrome browser to synchronize the selected time zone.
Using the Sidebar
After you connect to a remote desktop or hosted application, you can use the sidebar to launch other
applications and desktops, switch between running desktops and applications, and perform other actions.
When you access a remote application or desktop, the sidebar appears on the left side of the screen.
Click the sidebar tab to display or hide the sidebar. You can also slide the tab up and down.
VMware Horizon HTML Access Installation and Setup Guide
VMware, Inc. 43