Installation and Setup Guide

Table Of Contents

2 Find log entries for the webcam or microphone.

a Open the debug log file with a text editor.

The log file with real-time audio-video log messages is located at /tmp/vmware-

<username>/vmware-RTAV-<pid>.log. The client log is located at /tmp/vmware-

<username>/vmware-view-<pid>.log.

b Search the log file to find the log file entries that reference the attached webcams and

microphones.

The following example shows an extract of the webcam selection:

main| I120: RTAV: static void VideoInputBase::LogDevEnum() - 3 Device(s) found

main| I120: RTAV: static void VideoInputBase::LogDevEnum() - Name=UVC Camera (046d:0819)

UserId=UVC Camera (046d:0819)#/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.4/1-3.4.5

SystemId=/dev/video1

main| I120: RTAV: static void VideoInputBase::LogDevEnum() - Name=gspca main driver

UserId=gspca main driver#/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.4/1-3.4.7

SystemId=/dev/video2

main| I120: RTAV: static void VideoInputBase::LogDevEnum() -

Name=Microsoft

LifeCam HD-6000 for Notebooks UserId=Microsoft

LifeCam HD-6000 for

Notebooks#/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.6 SystemId=/dev/video0

main| W110: RTAV: static bool AudioCaptureLin::EnumCaptureDevices(MMDev::DeviceList&) -

enumeration data unavailable

The following example shows an extract of the audio device selection, and the current audio level

for each:

vthread-18| I120: RTAV: bool AudioCaptureLin::TriggerEnumDevices() - Triggering enumeration