Installation and Setup Guide

Table Of Contents
n
Connect the USB device to a remote hosted application.
a In the desktop and application selector window, open the remote application.
The name of the application is the name that your administrator has configured for the
application.
b In the desktop and application selector window, right-click the application icon and select
Settings.
c In the left pane, select USB Devices.
d In the right pane, select the USB device and click Connect.
e Select the application, and click OK.
Note The name of the application in the list comes from the application itself and might not
match the application name that your administrator configured to appear in the desktop and
application selector window.
You can now use the USB device with the remote application. After you close the application, the
USB device is not released right away.
f When you are finished using the application, to release the USB device so that you can access it
from your local system, in the desktop and application selector window, open the Settings window
again, select USB Devices, and select Disconnect.
n
Configure Horizon Client to connect USB devices automatically to the remote desktop when
Horizon Client starts.
This option is selected by default.
a Before you plug in the USB device, start Horizon Client and connect to a remote desktop.
b From the Horizon Client menu bar, click Connect USB Device.
c Select Automatically Connect at Startup.
d Plug in the USB device and restart Horizon Client.
USB devices that you connect to your local system after you start Horizon Client are redirected to the
remote desktop. USB devices that you connect to your local system after you start Horizon Client are
redirected to the remote desktop.
n
Configure Horizon Client to connect USB devices automatically to the remote desktop when you plug
them in to the local system.
Enable this option if you plan to connect devices that use MTP drivers, such as Android-based
Samsung smart phones and tablets. This option is selected by default.
a Before you plug in the USB device, start Horizon Client and connect to a remote desktop.
b From the Horizon Client menu bar, click Connect USB Device.
VMware Horizon Client for Linux Installation and Setup Guide
VMware, Inc. 75