User manual

When the relative mouse feature is enabled, performance might be slow if you are outside the corporate
network, on a WAN.
I This feature requires a View 5.2 or later desktop, and you must turn on 3D rendering for the
desktop pool. For more information about pool seings and the options available for 3D rendering, see the
Seing Up Virtual Desktops in Horizon 7 or Seing Up Published Desktops and Applications in Horizon 7
document.
Using Scanners
You can scan information into your remote desktops and applications with scanners that are connected to
your local client system. This feature redirects scanning data with a signicantly lower bandwidth than can
be achieved by using USB redirection.
Scanner redirection supports standard scanning devices that are compatible with the TWAIN and WIA
(Windows Image Acquisition) formats. Although you must have the scanner device drivers installed on the
client system, you do not need to install the scanner device drivers on the remote desktop operating system
where the agent is installed.
If a Horizon administrator has congured the scanner redirection feature, and if you use the Blast Extreme
display protocol or the PCoIP display protocol, a scanner connected to your local system can be used in a
remote desktop or application.
I If you are using a scanner, do not connect it from the Connect USB Device menu in
Horizon Client. To do so routes the device through USB redirection, and the performance will be unusable.
When scanning data is redirected to a remote desktop or application, you cannot access the scanner on the
local computer. Conversely, when a scanner is in use on the local computer, you cannot access it on the
remote desktop or application.
Tips for Using the Scanner Redirection Feature
n
Click the scanner icon ( ) in the system tray, or notication area, of the remote desktop to select a non-
default scanner or to change conguration seings. On RDS applications, the system tray icon is
redirected to the local client computer.
You do not have to use the menu that appears when you click this icon. Scanner redirection works
without any further conguration. The icon menu allows you to congure options such as changing
which device to use if more than one device is connected to the client computer.
N If the menu that appears does not list any scanners it means that an incompatible scanner is
connected to the client computer. If the scanner icon is not present, it means that the scanner redirection
feature is disabled or not installed on the remote desktop. Also, this icon does not appear on Mac or
Linux client systems because the feature is not supported on those systems.
n
Click the Preferences option in the menu to select options to control image compression, hide webcams
from the scanner redirection menu, and determine how to select the default scanner.
You can select the option to hide webcams if you plan to use the Real-Time Audio-Video feature to
redirect webcams, which is what VMware recommends. Use scanner redirection with webcams to take
a photograph of yourself and scan it.
N If you congure scanner redirection to use a specic scanner and that scanner is not available,
scanner redirection will not work.
n
Although most TWAIN scanners display the a scanner seings dialog box by default, some do not. For
those that do not display seings options, you can use the Preferences option in the scanner icon menu,
and select Always show Scanner  dialog option.
Chapter 5 Working in a Remote Desktop or Application
VMware, Inc. 97