User manual

Table Of Contents
Table 39. Horizon Client Configuration Template: USB Filtering Settings (Continued)
Setting Properties
Include Path
Include devices at a specied hub or port paths that can be redirected. The format of the
seing is bus-x1[/y1].../port-z1[;bus-x2[/y2].../port-z2]...
You must specify bus and port numbers in hexadecimal. You cannot use the wildcard
character in paths.
For example: bus-1/2_port-02;bus-1/7/1/4_port-0f
The default value is undened.
Include Vid/Pid Device
Includes devices with specied vendor and product IDs that can be redirected. The format
of the seing is vid-xxx1_pid-yyy2[;vid-xxx2_pid-yyy2]...
You must specify ID numbers in hexadecimal. You can use the wildcard character (*) in
place of individual digits in an ID.
For example: vid-0561_pid-554c
The default value is undened.
View PCoIP Client Session Variables ADM Template Settings
The View PCoIP Client Session Variables ADM template le (pcoip.client.adm) contains policy seings
related to the PCoIP display protocol. You can congure seings to default values that can be overridden by
an administrator, or you can congure seings to values that cannot be overridden.
This ADM le is available in a bundled .zip le named VMware-Horizon-Extras-Bundle-x.x.x-yyyyyyy.zip,
which you can download from the VMware download site at
hps://my.vmware.com/web/vmware/downloads. Under Desktop & End-User Computing, select the
VMware Horizon 7 download, which includes the bundled .zip le.
Table 310. View PCoIP Client Session Variables
Setting Description
Configure PCoIP
client image cache
size policy
Controls the size of the PCoIP client image cache. The client uses image caching to store
portions of the display that were previously transmied. Image caching reduces the amount
of data that is retransmied.
When this seing is not congured or when it is disabled, PCoIP uses a default client image
cache size of 250MB.
When you enable this seing, you can congure a client image cache size from a minimum
of 50 MB to a maximum of 300 MB. The default value is 250MB.
Configure PCoIP event
log verbosity
Sets the PCoIP event log verbosity. The values range from 0 (least verbose) to 3 (most
verbose).
When this seing is enabled, you can set the verbosity level from 0 to 3. When the seing is
not congured or disabled, the default event log verbosity level is 2.
When this seing is modied during an active PCoIP session, the new seing takes eect
immediately.
Configure PCoIP
session encryption
algorithms
Controls the encryption algorithms advertised by the PCoIP endpoint during session
negotiation.
Checking one of the check boxes disables the associated encryption algorithm. You must
enable at least one algorithm.
This seing applies to both agent and client. The endpoints negotiate the actual session
encryption algorithm that is used. If FIPS140-2 approved mode is enabled, the Disable
AES-128-GCM encryption value will be overridden if both AES-128-GCM encryption and
AES-256-GCM encryption are disabled.
If the Configure SSL Connections seing is disabled or not congured, both the
Salsa20-256round12 and AES-128-GCM algorithms are available for negotiation by this
endpoint.
Supported encryption algorithms, in order of preference, are SALSA20/12-256, AES-
GCM-128, and AES-GCM-256. By default, all supported encryption algorithms are available
for negotiation by this endpoint.
Using VMware Horizon Client for Windows
52 VMware, Inc.