Administration

Enable Two-Factor Authentication in View Administrator
You enable a View Connection Server instance for RSA SecurID authentication or RADIUS authentication
by modifying View Connection Server settings in View Administrator.
Prerequisites
Install and configure the two-factor authentication software, such as the RSA SecurID software or the
RADIUS software, on an authentication manager server.
n
For RSA SecurID authentication, export the sdconf.rec file for the View Connection Server instance
from RSA Authentication Manager. See the RSA Authentication Manager documentation.
n
For RADIUS authentication, follow the vendor's configuration documentation. Make a note of the
RADIUS server's host name or IP address, the port number on which it is listening for RADIUS
authentication (usually 1812), the authentication type (PAP, CHAP, MS-CHAPv1, or MS-CHAPv2) and
the shared secret. You will enter these values in View Administrator. You can enter values for a
primary and a secondary RADIUS authenticator.
Procedure
1 In View Administrator, select View Configuration > Servers.
2 On the Connection Servers tab, select the server and click Edit.
3 On the Authentication tab, from the 2-factor authentication drop-down list in the Advanced
Authentication section, select RSA SecureID or RADIUS.
4 To force RSA SecurID or RADIUS user names to match user names in Active Directory, select
Enforce SecurID and Windows user name matching or Enforce 2-factor and Windows user
name matching.
If you select this option, users must use the same RSA SecurID or RADIUS user name for Active
Directory authentication. If you do not select this option, the names can be different.
5 For RSA SecurID, click Upload File, type the location of the sdconf.rec file, or click Browse to
search for the file.
View Administration
VMware, Inc. 67