Specifications

www.vmware.com
220
VMware GSX Server Virtual Machine Guide
Installing an Operating System
onto a Physical Partition from a
Virtual Machine
In some situations, you may want to install a guest operating system directly on a
physical disk or partition — also known as a raw disk — even if you do not need to
boot that disk on the host, outside of the virtual machine.
It is possible to use either an unused partition or a completely unused disk on the host
as a disk in the virtual machine. However, it is important to be aware that an operating
system installed in this setting probably cannot boot outside of the virtual machine,
even though the data is available to the host.
Caution: You cannot use a physical disk that is stored on a SAN. You must use a disk or
a partition on the GSX Server host.
If you have a dual-boot system and want to configure a virtual machine to boot from
an existing partition, see Configuring a Dual-Boot Computer for Use with a Virtual
Machine on page 198. The instructions in this section do not apply to a disk with a
previously installed operating system.
Caution: Physical disks are an advanced feature and should be configured only by
advanced users.
GSX Server uses description files to control access to each physical disk on the system.
These description files contain access privilege information that controls a virtual
machine’s access to certain partitions on the disks. This mechanism prevents users
from accidentally running the host operating system again as a guest or running a
guest operating system that the virtual machine is not configured to use. The
description file also prevents accidental writes to physical disk partitions from badly
behaved operating systems or applications.
Use the New Virtual Machine Wizard to configure a virtual machine to use existing
physical disk partitions. The wizard guides you though creating a new virtual machine
including configuring the physical disk description files. Rerun the wizard to create a
separate configuration for each guest operating system installed on a raw partition.
Note: While installing the guest operating system on a physical disk, if your virtual
machine does not boot from the CD-ROM, try changing the boot order in the virtual
machine’s BIOS. Restart the virtual machine, then press F2 while the virtual machine is
booting to enter the BIOS. Change the boot order there.