Installation guide

www.vmware.com
44
VMware ESX Server Administration Guide
• Click System LUN/Disk to allow the virtual machine to access a physical disk
stored on a LUN. Then specify the following.
a. Choose the LUN you want to use in the Storage Controller LUN list.
b. Specify the virtual device node. Select the appropriate SCSI ID in the Virtual
SCSI Node list.
6. When you are finished configuring the virtual disk, click Next. The Hardware tab
for this virtual machine appears.
You can change any of the default settings ESX Server assigned to the virtual
machine (such as the disk mode, network card, color depth and any removable
devices) or configuration items you specified as you create the virtual machine.
To change any hardware, see Configuring a Virtual Machine’s Hardware on
page 116.