Installation guide

CHAPTER 3 Using the VMware Management Interface to Manage Your Virtual Machines
137
3. Click Generic SCSI Device. The SCSI Device page appears.
4. To connect this virtual machine to the server’s SCSI device when the virtual
machine is powered on, check Connect at Power On.
5. In the Virtual SCSI Node field, select <x>:<y> as determined in step 1.
6. In the Device entry field, type:
vmhba<x>:<y>:<z>:0
7. Click OK to add the device.
Removing Hardware from a Virtual Machine
To remove hardware from a virtual machine, access the Hardware page. Next to the
item you want to remove, click Remove. You are asked for confirmation before the
device is removed.
Note: You cannot remove some items from a virtual machine, such as the processor,
SCSI controller or the virtual display.