Installation guide

CHAPTER 3 Using the VMware Management Interface to Manage Your Virtual Machines
135
5. Enter the location of the drive or floppy image in the Location field. For example,
the server’s floppy drive could be /dev/fd0.
6. Click OK to add the drive.
Adding a Generic SCSI Device to a Virtual Machine
To add a new generic SCSI device to a virtual machine, make sure the virtual machine
is powered off, then complete the following steps.
1. On the Hardware page, click Add Device. The Add Device Wizard starts.
2. Click Generic SCSI Device. The SCSI Device page appears.
3. To connect this virtual machine to the server’s SCSI device when the virtual
machine is powered on, check Connect at Power On.
4. In the Device entry field, specify the name of the device, such as /dev/sga.