Installation guide

www.vmware.com
132
VMware ESX Server Administration Guide
2. Click Network Adapter. The Network Adapter page appears.
3. In the Device Binding list, select the virtual network device which you want the
virtual machine to use.
4. In the Virtual Device list, select the network driver you want the virtual machine
to use. Choose either the vlance or vmxnet driver.
5. Click OK to add the network adapter.
Adding a Virtual DVD/CD-ROM Drive to a Virtual Machine
If your server contains a DVD/CD-ROM drive, you can add a DVD/CD-ROM drive to the
virtual machine. You can point the CD-ROM drive to an ISO disk image file.
A device can be connected to only one virtual machine on a server at a time.
To add a new virtual DVD/CD-ROM drive to a virtual machine, make sure the virtual
machine is powered off, then complete the following steps.
1. On the Hardware page, click Add Device. The Add Device Wizard starts.