Installation guide

CHAPTER 3 Using the VMware Management Interface to Manage Your Virtual Machines
131
• Click System LUN/Disk to allow the virtual machine to access a physical disk
stored on a LUN. Then specify the following.
a. Choose the LUN you want to use in the Storage Controller LUN list.
b. Specify the virtual device node. Select the appropriate SCSI ID in the Virtual
SCSI Node list.
4. Click OK to add the disk.
Adding a Virtual Network Adapter to a Virtual Machine
To add a new virtual network adapter to a virtual machine, make sure the virtual
machine is powered off, then complete the following steps.
1. On the Hardware page, click Add Device. The Add Device Wizard starts.