Specifications

www.vmware.com
92
VMware GSX Server Administration Guide
28. Windows asks for the file dhcpsvc.dll. Enter the location
C:\Windows\System, then click OK.
29. Windows asks for the file inetmib1.dll. Enter the location C:\Windows,
then click OK.
30. Windows asks for the file locproxy.exe. Enter the location
C:\Windows\System, then click OK.
31. Windows asks for the file ndishlp.sys. Enter the location C:\Windows,
then click OK.
32. Windows asks for the file wshtcp.vxd. Enter the location
C:\Windows\System, then click OK.
33. A dialog box indicates that Windows has finished installing the software. Click
Finish.
34. To install the sound adapter, follow the directions in Installing Sound Drivers in
Windows 9x and Windows NT Guest Operating Systems in the VMware GSX
Server Virtual Machine Guide.
35. If you have serial ports configured in the virtual machine, go to the Windows
Device Manager and uninstall all the COM ports listed there.
36. Restart the virtual machine.
37. Windows detects the COM ports and installs them properly.
Windows 95 Guest
The following steps provide examples of what you may see as your guest operating
system recognizes the new virtual hardware. The specific steps may vary, depending
on the configuration of the virtual machine.
1. Power on the virtual machine and let it update the CMOS.
2. Windows detects new devices and automatically installs the drivers. Restart the
guest operating system after this process is complete.
3. When Windows restarts, it detects more new devices.
4. Windows asks for the file lpt.vxd. Enter the location
C:\Windows\System, then click OK.
5. Windows detects a PCI standard host bridge and other devices. Click OK to
dismiss these messages. You do not need to install these drivers.
6. Click Finish.