Specifications

www.vmware.com
136
VMware GSX Server Administration Guide
4. To change the location of the suspended state file, enter the location on the
host in the Suspend File Location list.
5. To change whether logging is enabled for the virtual machine, check (to enable)
or clear (to disable) the Enable Logging check box.
6. To change whether the virtual machine is running with debugging information,
check (to enable) or clear (to disable) the Run with Debugging Information
check box.
7. Click OK to save your changes and close the window.
Setting Virtual Machine Startup and Shutdown Options
You can configure whether a virtual machine starts when the system starts, and how
it shuts down when the system shuts down. You can enable these settings as long as
the startup and shutdown options are enabled for the server. See Configuring Startup
and Shutdown Options for Virtual Machines on page 145.
To configuring a virtual machine’s startup and shutdown options, complete the
following steps.
1. Power off the virtual machine and click Edit under System Startup Options or
System Shutdown Options. The Options page appears.
2. To allow the virtual machine to start up when the system starts up, check the
Start Virtual Machine check box.
Specify the period of time before the next virtual machine starts in the Continue
Starting Virtual Machines After list. Choose the number of minutes or whether
GSX Server should not wait before starting the next virtual machine. If you select
Other, a prompt appears; specify in the prompt the number of minutes to wait.
The System Default is specified in Configuring Startup and Shutdown Options
for Virtual Machines on page 145.
To specify that VMware Tools should start in a virtual machine before the next
virtual machine starts, check the when VMware Tools starts check box. If