Specifications

VMware, Inc. 289
Chapter 10 Configuration for Clustering
9From!the!Virtual!Disk!Image!drop‐down!list,!choose!cluster2.vmdk.!
10 Choose!the!virtual!SCSI!node!to!which!you!want!to!attach!the!virtual!disk,!and!click!
Next.
Virtual Disk Configuration
You!need!a!shared!SCSI!controller!and!shared!SCSI!disks!for!shared!access!to!clustered!
services!and!data.!
To add a shared SCSI controller and shared SCSI disks
1Click!the!Hardware!tab!
for!this!virtual!machine.
2Click!Add!Device.
3Click!Hard!Disk.
4Add!the!pre‐exiting!quorum!disk!(quorum.vmdk)!that!you!created!in!“Virtual!Disk!
Configuration”!on!page 286.
5 Choose!the!virtual!SCSI!node!to!which!you!want!to!attach!the!virtual!disk.
Shared!disks!must!be!attached!to!a!separate!SCSI!controller.!Select!
SCSI!1:1.
6Click!Persistent!to!verify!the!disk!mode,!and!click!OK.
By!default!the!disk!mode!is!set!to!Persistent.!
A!new!virtual!disk!and!SCSI!Controller!1!are!now!visible!on!the!Hardware!tab.
7Click!Edit!next!to!SCSI!Controller!1!to!change!the!bus!sharing!from!none!to!
virtual.
8From!the!Bus!Sharing!drop‐down!list!select!virtual,!and!click!OK.
Repeat!Step 1–Step !to!add!an!additional!shared!virtual!disk!using!SCSI!1:2!with!the!
filename!shared2.vmdk.!
Network Device Configuration
You!need!an!additional!virtual!network!adapter!to!be!used!by!Microsoft!Cluster!Service!
to!maintain!the!cluster!heartbeat.!
To add this adapter
1Click!the!Hardware!tab!for!this!virtual!machine.
2Click!Add!Device.
3Click!Network!Adapter.
4From!the!Device!Binding!drop‐down!list!choose!vmnet_0.!