Specifications

Administration Guide
112 VMware, Inc.
To configure a virtual machine’s generic SCSI device
1To!configure!an!existing!generic!SCSI!device,!on!the!Hardware!tab,!under!Generic!
SCSI!Device,!click!Edit.!
The!Generic!Device!(SCSI!<ID>)!dialog!box!appears.
2To!connect!this!virtual!machine!to!the!server’s!SCSI!device!when!the!virtual!
machine!is!powered!on,!check!Connect!at!Power!On.
3In!the!Device
!drop‐down!list,!choose!the!appropriate!device.
4 Select!the!appropriate!SCSI!ID!in!the!Virtual!SCSI!Node!list.
5Click!OK!to!save!your!change!and!close!the!window.
Adding a Virtual Disk to a Virtual Machine
Make!sure!the!virtual!machine!is!powered!off,!and!complete!the!following!steps.
NOTE If!the!virtual!device!is!on!SCSI!controller!0:0,!a!warning!appears,!stating!that!
changing!the!SCSI!node!may!cause!the!virtual!machine!to!boot!improperly.