Specifications
33
EATON Pulsar Series and Powerware Series Product Catalogue
Eaton FlexPDU
Eaton HotSwap MBP
Part Numbers Eaton FlexPDU Eaton HotSwap MBP Eaton EX RT PDU
FR FlexPDU 8 FR: 68 435 HotSwap MBP 4 FR: 68 430 /
DIN FlexPDU 8 DIN: 68 436 HotSwap MBP 4 DIN: 68 431 /
BS FlexPDU 6 BS: 68 437 HotSwap MBP 3 BS: 68 432 /
IEC FlexPDU 12 IEC: 68 438 HotSwap MBP 6 IEC: 68 433 Eaton EX RT PDU: 66 857
HW (Hard-Wired) / HotSwap MBP HW: 68 434 /
10A French/Schuko cable kit for HotSwap MBP / 68 439 /
10A British cable kit for HotSwap MBP / 68 440 /
Cables Typical applications Part numbers
2 IEC 10A (IEC C13 - IEC C14) cable kit Extra output cables for UPSs 66 395
1 IEC 16A (IEC C20 - IEC C19) cable For connecting to the IEC 16A output of a UPS 66 396
2 16A FR/Schuko cable kit Connecting Eaton STS 16 to wall sockets 66 397
1 IEC 10A/16A (IEC C14 - IEC C19) cable connecting Eaton STS to IEC 10A outlets 66 029
1 BS power cable BS input power cable for 2.2 to 3 kVA UPSs 66 236
1 Swiss power cable Swiss input power cable for 2.2 to 3 kVA UPSs 66 243
Flexible system for 19” rack-mounting or on
Eaton RT UPSs
French/Schuko/British/IEC 10A sockets
IEC 16A output for cascading
IEC 16A input socket
Retaining clip
Flexible system for 19” rack-mounting or on
Eaton RT UPSs
French/Schuko/British/IEC 10A sockets
IEC 16A output for cascading
IEC 16A input socket
Retaining clip
Rotary bypass switch
Colour coded input and output sockets for
connecting the UPS
NB: hard-wired version available
Eaton FlexPDU Eaton HotSwap MBP
FR DIN/
Schuko
BS IEC C13
10 A
IEC C19
16 A
IEC C14
10 A
IEC C20
16 A
TECHNICAL SPECIFICATIONS
Eaton FlexPDU Eaton HotSwap MBP Eaton EX RT PDU
Current rating 16 A 16 A 52 A
Voltage rating 220-230-240-250 V
Installation
Format 1U (except BS) 19” rack-mounting
with multi-position mountings
>1U 19” rack-mounting
with multi-position mountings
2U 19” rack
Installation 19” rack horizontal or vertical mounting or on Eaton RT UPSs 19” rack or wall mounting
Dimensions H x W x D 44 x 483 x 80 mm (BS: 52 x 483 x 120 mm) 52 x 483 x 120 mm 89 x 483 x 90 mm
Connection
Inputs 1 IEC C20 (16A) connector and 2 cables
(1 IEC 16A - 16A cable and 1 IEC 10A - 16A
cable) for connection to any UPS
FR / DIN / BS / IEC models: 1 IEC C20 (16A)
connector and 1 IEC 16A - 16A cable
(1)
HW (Hard-Wired): terminal block
Pre-wired 0.5 m cable for connection
Outputs
FR 8 French sockets + 1 IEC 16A socket 4 French sockets + 1 IEC 16A socket /
DIN 8 Schuko sockets + 1 IEC 16A socket 4 Schuko sockets + 1 IEC 16A socket /
BS 6 British sockets + 1 IEC 16A socket
(with 2 circuit breakers)
3 British sockets + 1 IEC 16A socket
(with 1 circuit breaker)
/
IEC 12 IEC 10A sockets + 1 IEC 16A socket
(with 2 circuit breakers)
6 IEC sockets + 1 IEC 16A sockets
(with 1 circuit breaker)
8 IEC 10A sockets + 4 IEC 16A sockets
(with 4 circuit breakers)
HW NA Terminal block /
Cascading Yes, IEC 16A output socket (except HW)
Retaining clips Retaining clips on the IEC input and output sockets
Operating conditions, standards and approvals
Operating temperature 0°C to 45°C continuous
Performance - Safety - EMC FR models: IEC 60 884-1 - DIN models: DIN 49 440-1, DIN 49 440-5,
DIN 49 440-6 - BS models: BS 1363
IEC models: IEC 60 320-1, EN 60 320-1 - HW models: IEC 60 950, EN 50 091
IEC/EN 60 320-1
Approvals CE
1: Use cable kits P/N 66 439 (French/Schuko) or 66 440 (British) for connecting a low power UPS <2.2 kVA (with IEC 10A outputs) - see below.