Specifications

Troubleshooting and Contact Information
4-7
How Do I Change the Smart Protection Server Hostname?
To change the hostname:
1. Log on to the Command Line Interface (CLI) using admin.
2. Type the following commands:
enable
configure hostname <hostname>
3. Verify the changes by typing the following command:
show hostname
How Do I Perform an Upgrade If a Pattern is Updating?
Trend Micro recommends waiting until a pattern finishes updating before performing
an upgrade. To prevent an update from occurring while upgrading disable scheduled
updates.
To change the Pattern Update configuration:
1. Log on to the Smart Protection Server web management console using admin.
2. Click Updates > Pattern.
3. Disable scheduled updates.
4. Click Save.
Note: After performing an upgrade, remember to enable the scheduled updates.