User`s guide

Troubleshooting AppSpeed
Installation and Deployment 9
If you encounter problems when installing and deploying AppSpeed, use this troubleshooting information.
This chapter includes the following topics:
n
“AppSpeed Setup Errors,” on page 31
n
“Navigation to Web Page Cancelled,” on page 32
n
“AppSpeed View Does Not Load,” on page 33
n
“Unable to Connect to AppSpeed,” on page 33
n
“AppSpeed Server Namespace Is Not Recognized,” on page 34
AppSpeed Setup Errors
You might have problems while setting up AppSpeed.
n
Failed to Register AppSpeed with vCenter Server on page 31
You are unable to register AppSpeed with vCenter Server.
n
vCenter Server HTTPS Web Service Port Does Not Work with Port 443 on page 32
You are unable to complete setup because the vCenter Server HTTPS Web service is not working.
n
vCenter Server HTTPS Web Service Port Traffic Is Blocked on page 32
You are unable to complete setup because the vCenter Server HTTPS Web service is not working.
Failed to Register AppSpeed with vCenter Server
You are unable to register AppSpeed with vCenter Server.
Problem
Setup fails and an error message appears.
Failed to register AppSpeed with vCenter Server:
Unable to find AppSpeed Server on the configured vCenter Server.
Cause
You entered the IP address of a vCenter Server that is not the server on which AppSpeed was installed.
Solution
1 Verify the vCenter Server IP address.
2 Run setup again and enter the correct IP address.
VMware, Inc.
31