1.0

www.vmware.com
92
VMware ACE Administrator’s Manual
3. The Networks and Machines panel appears.
Enter the IP address or the fully qualified host name for each network or machine
that should be on the whitelist or blacklist, then click Add.
If you enter a host name, the wizard resolves the name and displays both the
host name and the IP address in the list.
To specify a single machine, you may also enter its IP address.
To specify a subnet, enter the starting IP address for the subnet, select Subnet
mask and enter the mask in the corresponding field in dotted quad format.
When the list is complete, click Next.
4. If you specified networks and machines that are allowed, the Network Traffic
panel appears. If you specified networks and machines that are denied, skip to
the next step.
Using this panel, you may set up exceptions to allow certain types of network
traffic that would otherwise be blocked by the rules you set on the Networks
and Machines panel. This is useful, for example, if virtual machine users are
restricted to a particular subnet but the DNS server on your network is not on
that subnet.