Instruction Sheet For: FP-XMFT & FP-XMFTB For more information, please contact us at: 345 Log Canoe Circle, Stevensville, Maryland 21666 Toll Free: 877.281.2169 Phone: 410.643.6390 Fax: 410.643.6615 www.videomount.
ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 DESCRIPTION Wall Plate Vertical Support Tilt Bracket Side Wall A Side Wall B Side Wall C Side Wall D Socket Screw M8*P1.25*L20 Top Lip Bottom Lip Security Screw M5*P0.8*L20 Long Allen Key M4 Cross Screw M5*P0.8*L8 Cross Screw M4*P0.7*L5 Cross Screw M4*P0.7*L12 Cross Screw M5*P0.8*L12 Cross Screw M6*P1.0*L12 Cross Screw M8*P1.25*L16.5 Cross Screw M4*P0.7*L30 Cross Screw M5*P0.8*L30 Cross Screw M6*P1.
Step 1 Before starting, lay out all parts to your mount and match them to the parts list provided. Verify that you have all your parts before attempting to assemble the mount. Step 2 Assemble the wall plate by attaching the two horizontal wall plates 1 using the vertical supports 2 and short M4 screws 14 . You can identify the difference between the top and bottom rail by the fact that the top rail is the one with the stopper flaps on either end.
Step 5 Adjust the tilt tension by tightening the socket head screws 8 with the M5 Allen Key 33 so they are fairly tight. Note: You may have to adjust the tilt tension once the flat screen is on the wall so do not tighten as hard as you can because it will make further adjustment on the wall much more difficult. Step 6 Use the hooks on the top lip 9 to hook on the top rail of the wall plate 1 .
