User Manual

11
activate the IR LED, the image will change to black and
white. The IR LED have seven levels, short press IR
UP button to up the level, short press IR DOWN button
to down the level.
Note: If the battery voltage is not enough, the IR LED
level will down automatically. IR level can up to 7 levels
when the battery power is full.
If only left half power, the level just can up to 5. If only
left 25% power, the level just can up to 3. If the battery
power is lower than 25%, IR LED cannot be activated.
¾
Settings in Photo and Video Mode
Press Menu button in photo or video mode, can
change the settings.
Menu Function
Photo
Resolution
Set the photo resolution.
Options:[1M 1280x960]/[VGA
640x480]