User's Manual

Table Of Contents

vMix User Guide

20 / 208

Inverted: By default the display will have a black background. Click the Inverted button to switch this to

white.

Type: Select the type of time to display out of Clock, Event, Recording and Streaming.

Precision: Determine how accurate the time is that is displayed out of Minutes, Seconds and Fractions.

The font size will automatically decrease at higher accuracies so the entire time will still be displayed, so if

a bigger font

is desirable select Minutes here.

Clock Settings

Hour offset: Select an offset, positive or negative in hours, to add to the current system time before display.

AM/PM: Tick to show the time in 12 hour format with AM or PM next to the time on the display, otherwise

display in 24 hour format.

Event Settings

Start/End: Select a start time and optionally an end time for the event.

Before the Start time, the clock will show a countdown in amber.

With End Time

During the event, the clock will show a green countdown.

After the End Time, the clock will show a red of the duration since the event ended.

Without End Time

After the Start time, the clock will show a green duration.

Create Input

Create Input will create a high resolution version of the clocks as a standard vMix input, allowing it to be

displayed

on the MultiView Output or on outputs such as Fullscreen.

If the "Cameras / Calls / Audio Inputs" tickbox is enabled in Settings -> Outputs / NDI this input will also

be available

via NDI for display anywhere on the local network.

Note: Only one Production Clocks input can be created at a time.