Service manual

S ECTION 5 – REPLACING COMPONENTS

CAFFÈ MIO – OPERATION AND SERVICE Page 74 of 110

Replacing Major Components

Ingredient Dispenser Motor

1. With machine power OFF, ope n the front door and ope n the machine lid.

2. Remove the brewer.

a) Refer to the "

Replacing the Brewer" instructions in this manual.

3. Remove the brewer bracket.

a) Refer to the "

Replacing the Brewer Bracket" instructions in this manual.

4. Remove the spill plate that surrounds the two dispensers.

a) Remove the screws at the front and rear of the spill plate securing it to the top of the machine.

b) Remove the lids on both of the dispensers.

c) Slide the spill plate up and over the dispensers to remove it.

5. Rotate both ingredient dispenser spouts upwards.

6. Re move the s crew securing the front of e ach dis pe nse r to the dis pense r base.

Spill Plate

Remove Screw

Spill Plate and Dispenser

Lids Removed

Remove Lid

Remove