Service manual

S ECTION 5 – REPLACING COMPONENTS
CAFFÈ MIO – OPERATION AND SERVICE Page 69 of 110
Replacing Major Components
6. Carefully pull the temperature probe’s wiring out the top of the machine.
a) Any tie-wraps securing the temperature probe wiring to the main water tank wiring harness
will need to be cut.
7. Install the ne w probe into the gromme t on the wate r tank top.
8. Drop the temperature probe connector (harness) down the front of the water tank (valve area)
and route it to the rear board.
Temperature Probe
Push into Grommet
Grommet
Temp. Probe Wiring