Service manual

S ECTION 5 – REPLACING COMPONENTS
CAFFÈ MIO – OPERATION AND SERVICE Page 66 of 110
Replacing Major Components
Heater Element
1. With machine power OFF, remove the water tank lid.
a) Refer to the "
Replacing the Water Tank Lid" instructions in this manual.
2. Remove the wires from the heater element terminals.
3. Detach the thermal cut-off switch from the heater element.
a) Remove the clamp securing the thermal cut-off switch to the element.
4. Remove the two 11/16" brass nuts securing the heater element to the lid.
WARNING: To avoid severe burns, make absolutely certain that the heater
element is not hot before proceeding!
Thermal Cut-Off
Remove Clamp
Remove
Remove