Service manual

S ECTION 5 – REPLACING COMPONENTS

CAFFÈ MIO – OPERATION AND SERVICE Page 52 of 110

Replacing Major Components

8. Install the brewer motor onto the brewer bracket.

a) Install the brewer motor to the brewer bracket using four screws – the stack of the brewer

motor should be towards the right side.

b) Tighten all four screws.

9. Re-connect the power wires to the brewer motor.

a) Wires #8 and #9.

10. Install the s witch plate assembly onto the new brewer motor.

a) Secure the switch plate to the motor with three screws.

Install

Brewer Bracket

Brewer

Motor

Stack

Install

Wire #8

Switch Plate

Brewer Motor

Wire #9

Install