Service manual

S ECTION 5 – REPLACING COMPONENTS
CAFFÈ MIO – OPERATION AND SERVICE Page 43 of 110
Replacing Major Components
7. Pull the old valve(s) out towards you making certain to leave the silicone valve support in place.
8. Inse rt the ne w valve (s) into the appropriate outlet of the hot water tank.
a) The top outlet is for chocolate, the center for hot water and the lower for coffee water.
9. Re-connect the valve wires.
a) Coffee valve wires are numbered #3 and #1-8. Hot water valve wires are numbered #2 and #1-7.
Chocolate valve wires are numbered #4 and #1-6. The green ground wires also need to be reconnected.
CAUTION:
A small quantity of water will drip out when a valve is removed
and this water may be extremely hot. Use caution when removing the
outlet valves.
Silicone Support
Hot Water Valve
Chocolate Valve
Coffee Valve
#1-7
#2
#1-6
#4
#1-8
#3
#13-6
#13-4
#13-5