Specifications

Eccellenza Express Operating Manual
82 May 13, 2015
MESSAGE DISPLAYED
CAUSE
POSSIBLE REMEDIES
Water Source Error
Indicates a problem with
the main water supply not
getting to the water tank.
At this point, the water tank is not full
and this message has to be reset. To
reset it, switch the power off and on.
If the problem persists, check all
components on the water line (water
filter, tubing, fittings, etc.).
Check inlet valve to make certain it
is functioning properly.
In the case of a temporary disruption
with the water supply, the coffee maker
will reset itself after every hour.
Whipper Error
An error has been
detected with the
whipper.
The whipper motor may be jammed.
Clean the whipper assembly.
Verify wiring to the whipper assembly.
The whipper motor assembly may
need to be replaced.