Specifications

Eccellenza Express – Operating Manual
May 13, 2015 79
Error Messages
MESSAGE DISPLAYED
CAUSE
POSSIBLE REMEDIES
Brewer Error
An error has been
detected with the brewer.
• Verify the brewer motor wiring.
• The brewer may be jammed. Repair
or replace the brewer.
• The brewer motor may be jammed.
Repair or replace the brewer motor.
Brewer Home Error.
Press Start to find home
The brewer is not in the
home or starting position.
• Press "START" (the TEXT BOX at the
top of the screen) to cycle the brewer.
• The home switch may be defective
or needs to be re-adjusted or cleaned.
• An electrical connection to the
brewer home switch is faulty.
• The brewer brake may not be
working properly. Adjust the brake or
replace the brewer motor.
Button Error
An error has been
detected with one of the
interior buttons.
• An interior button may be stuck in
the pressed position. Try to loosen the
jammed button.
Call Key Operator
The cashbox in the
changer unit is full (more
than $220).
• Empty the cashbox and reset the
Key Operator message.
Can Communic. Error
A communication error is
present between the
control board and
expansion board.
• Verify wiring connections to the
expansion board, control board, LCD
display and button boards.
• The expansion board may need to
be replaced.
Change Printer Paper
The paper roll is spent.
• Replace the paper roll.
Check Water Level
Probes
The water tank is
overfilling.
• Clean the water level probes.
• The water temperature may be too
high – lower the temperature.
• Inlet valve may be leaking – replace
inlet valve.
Cup Tray Overflow
Error
The cup tray on the front
of the door has overfilled.
• Remove and empty the contents of
the cup tray.
Expansion Board Error
An error has been
detected with the
expansion board.
• Verify the wiring connections to the
expansion display.
• Replace the expansion board.
Factory Data Error
The Factory Settings file
you are transferring is
corrupt.
• Get an updated Factory Settings file.