Service manual

Eccellenza Express – Service Manual
May 15, 2015 67
Enable the Printer:
⇒ Switch the machine power on and
make sure it is in Vending (Coin)
mode.
⇒ Press the ON/OFF (Online) button on
the printer to switch it ON.
⇒ Enter the machine “Set-Up” Mode
⇒ Select the “Set Vending” menu
⇒ Select “Vending Device”
⇒ Select “Printer”
⇒ Select “Activate”
Set the Clock:
⇒ Enter the “Set-Up” Mode
⇒ Select the “Set Interface” menu
⇒ Select “Set Clock”
⇒ Select “Set Day” and set the day
⇒ Press “Previous”
⇒ Select “Set Month” and set the month
⇒ Press “Previous”
⇒ Select “Set Year” and set the year
⇒ Press “Previous”
⇒ Select “Set Hour” and set the hour
⇒ Press “Previous”
⇒ Select “Set Minutes” and set the minutes
Printer Buttons
>> - Paper Feed Button
II - ON/OFF Line Button (Power)
Paper Specifications:
Paper Width (mm):
60 +0/-0.5
Type of Paper:
Thermal roll, outside heat sensitive
Paper Roll Outside
Diameter (mm):
Max. 140 (with roll holder in standard position)
Max. 100 (with other roll holder positions)
Roll Core Inner
Diameter (mm):
12.5 +1/-0
Roll Core Outside
Diameter (mm):
≥25
Core Material:
Plastic or cardboard
Paper End:
Not attached to role core
Recommended Paper:
JUJO-AF50KS-E (standard grade, 55 g/m2)
JUJO-AF50KS-E3 (high sensitivity, 55 g/m2)
Koehler KT100 P (medium sensitivity, 100 g/m2)
Kanzan KPW 460 (heat stabilized, 73 g/m2)
Equivalent types can be used


Status LED