99-0063-000REV2
Owner’s Manual Welcome Congratulations on your purchase of the SmartView™ camera system. With this camera system, you get full view around your vehicle, especially in your blind spots. This manual contains information on getting familiar with your SmartView™ camera operating system and how it functions as well as installation of the product. Important Safety Information: This camera system product is designed and intended for the purpose of providing full view camera video for the driver.
Getting Started The SmartView™ camera system comes with 4 cameras. One camera for the front, one for the back, and two for both the left and right sides of the vehicle. Viewing these cameras is controlled by the blinkers, hazards, and putting the car in reverse. Left Blinker toggles the view of the BACK and LEFT side cameras. Right Blinker toggles the view of the BACK and RIGHT side cameras. www.vizualogic.
Getting Started (cont.) Hazards toggle the view of ALL the cameras. Putting the vehicle in Reverse toggles the view of the BACK, LEFT and RIGHT side cameras. 3 | Getting Started www.vizualogic.
Installing SmartView™ SmartView™ Overview The SmartView™ Camera System Includes: 1. 2 Side Cameras for Left & Right of Vehicle 2. 1 Front Camera 3. 1 Back Camera 4. Control Box 5. Wire Harness 6. 4 Screws for Mounting Cameras 7. Plastic & Metal Open-end Caps for Flush-mounting Rear Camera 8. Hole Saw for Flush-mounting Rear Camera 9. RCA Video Cable 10. Remote Control www.vizualogic.
Wire Harness Connections The SmartView™ wire harness has 7 wires which connect to the vehicle’s existing wire system. The wires have corresponding tags on them to know which wires to connect them to. • • • • • • • RED - +12ACC (Accessory Power) BLACK - Ground WHITE - Left Control (Signal) BLUE - Right Control (Signal) GREEN - N/A YELLOW - Reverse Control ORANGE - Reverse Transfer Wire (For Aftermarket Double Din Stereo) Installation STEP 1 - Make sure front windows are down.
Installation (cont.) STEP 3 - For the front camera installation, mount camera in a suitable area in the front of the vehicle. Use screws provided. Run front camera wire under hood along existing vehicle wires and into the firewall of the vehicle. STEP 4 - Locate the vehicle’s wires for turn signals, reverse, hazards, etc. Connect wire harness to the corresponding wires of vehicle. Remove center dash console and run vehicle wires attached to wire harness in the center dash area.
Wire Diagram 7 | Wire Diagram www.vizualogic.
Other Products HindSight™ Flip The all-new Vizualogic® Hindsight™ Flip is a revolutionary new backup camera system. Simply place your vehicle in reverse and Hindsight’s monitor automatically flips open and shows any obstacles behind your vehicle. Reversing is easy using the back-up assist lines to guide you, and the monitor flips closed as soon as you place the vehicle in drive. The Hindsight™ Flip comes with a fully adjustable 4.3” motorized monitor, a back-up camera, and all the necessary wiring.
SmartLogic® Headrest System The SmartLogic® system features a 1 GHz processor, 4GB of storage, (upgradeable with a MicroSD card to 32GB) front facing camera, built in WiFi capability, a 7” screen, and DVD playing capability. The Operating System is Android 4.1 Jelly Bean, allowing passengers to enjoy games, music, and movies, along with email, web browsing, video chat, and streaming video when paired with a Wi-Fi hotspot. Over 700,000 apps are available from the pre-loaded Google Play Store.
Notes VIZUALOGIC Notes | 10
For more info, visit our website at www.vizualogic.
