VIZIO® VW32L HDTV40A User Manual Dear VIZIO Customer, Congratulations on your new VIZIO VW32L HDTV40A High Definition LCD Television purchase. Thank you for your support. For maximum benefit of your set, please read these instructions before making any adjustments, and retain them for future reference. We hope you will experience many years of enjoyment from your new VIZIO VW32L HDTV40A. For assistance, please call (949) 698 - 4946 or e-mail us at techsupport@vizio.com.
VIZIO® VW32L HDTV40A User Manual Important Safety Instructions This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display. Keep these instructions in a safe place for future reference.
VIZIO® • • • • • VW32L HDTV40A User Manual Hold the power connector when removing the power cable. Pulling the power cable itself may damage the wires inside the cable and cause fire or electric shock. When the product will not be used for an extended period of time, unplug the power connector. To reduce risk of electric shock, do not touch the connector with wet hands. Insert batteries in accordance with instructions.
VIZIO® VW32L HDTV40A User Manual Opening the Package Your VIZIO VW32L HDTV40A and its accompanying accessories are carefully packed in a cardboard carton that has been designed to protect it from transportation damage. Now you have opened the carton check that the VW32L HDTV40A is in good condition and that all of the accessories are included. The VW32L HDTV40A weighs approximately 31lbs and is over 31” wide and we advise that you take sensible lifting precautions when you unpack and install the HDTV.
VIZIO® VW32L HDTV40A User Manual Additional Certified Accessories for the VIZIO VW32L HDTV40A are sold separately Wall Mounts High Definition Cables Extra or replacement Remote VIZIO also offers Installation Services and Extended Warranty Services for your VIZIO VW32L HDTV40A To purchase or inquire about additional accessories and services for your VIZIO product, visit our web site at www.VIZIO.
VIZIO® VW32L HDTV40A User Manual Preparing Your LCD HDTV for Wall Mounting The VIZIO VW32L HDTV40A can either be kept on the stand base or mounted on the wall for viewing. If you choose to mount the VW32L HDTV40A on the wall, please follow the instructions below for removing the stand base. To remove the stand base 1. Unplug all of the cables and cords from your VIZIO VW32L HDTV40A. 2.
VIZIO® VW32L HDTV40A User Manual Table of Contents Chapter 1 Basic Controls and Connections .................................................................. 9 1.1 Front Panel .......................................................................................................................................................... 9 1.2 Right Side Panel Controls ................................................................................................................................... 9 1.
VIZIO® VW32L HDTV40A User Manual 3.4.2 Auto Search ............................................................................................................................................... 45 3.4.3 Skip Channel ............................................................................................................................................. 45 3.4.4 MTS ..........................................................................................................................................
VIZIO® VW32L HDTV40A User Manual Chapter 1 Basic Controls and Connections 1.1 Front Panel Power ‘VIZIO’ light – The VIZIO name lights white when powered on and orange when powered off. Remote Control Sensor – This is the window through which all of the remote control signals pass to the sensor. Point the remote control directly at this window for the best response to the remote signal. 1.2 Right Side Panel Controls Power ( ) – Switch the VW32L HDTV40A on by pressing the button once.
VIZIO® VW32L HDTV40A User Manual 1.3 Rear Panel Connections 1 4 2 3 6 5 1. 2. 7 8 9 10 AC IN – Plug-in the supplied AC Power Cord here. SERVICE – This custom communication port is for factory service only. Use of this input for any purpose other than factory authorized service will void the manufacturer’s warranty of this equipment. 3. HDMI 1 – Connect the primary source for digital video such as a DVD multimedia player or set top box through this all digital connector.
VIZIO® VW32L HDTV40A User Manual 1.4 VIZIO Remote Control GUIDE – This button displays program information. Press this button once and the information of the program being viewed is shown. POWER – Press this button to turn the TV on from the Standby mode. Press it again to return to the Standby mode. TV – Press this button to select TV. AV – Press this button to select the Audio Video input. Pressing this button repeatedly will get you to the AV input.
VIZIO® VW32L HDTV40A User Manual 1.4.1 Insertion of Batteries in the Remote Control Press and slide out the battery cover by following the direction shown by the molded arrow on the surface of the cover. Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Press and slide the battery cover back into place.
VIZIO® VW32L HDTV40A User Manual Chapter 2 Connecting Equipment 2.1 Which Video Connection Should I Use? The VIZIO VW32L HDTV40A has six different ways to connect your video equipment from a basic connection to the most advanced for digital displays.
VIZIO® VW32L HDTV40A User Manual 2.2 Connecting Coaxial (RF) 2.2.1 Using Your Antenna or Digital Cable for DTV /TV 1. 2. 3. 4. Turn off the power to the HDTV. Connect the coaxial (RF) connector from your antenna or digital cable (out-of-the-wall, not from the Cable Box) to the DTV/TV CABLE/ANTENNA connector. Turn on the power to the HDTV. Select DTV using the INPUT button on the remote or side of the High Definition TV, or directly by pressing the TV button on the Remote Control.
VIZIO® VW32L HDTV40A User Manual 2.3 Connecting Your HDTV Set-Top Box 2.3.1 Using HDMI HDTV Set-Top Boxes that have a HDMI digital interface should be connected to the HDMI input of the LCD HDTV for optimal results. Note: To maintain the display quality, use a VIZIO certified HDMI. Length is available up to 10 meters. See www.VIZIO.com or call 1-888-VIZIOCE (1-888-849-4623) for details. Connecting your HDTV Set-Top Box (Best): 1. 2. 3. 4. 5. Turn off the power to the HDTV and HDTV Set-Top Box.
VIZIO® VW32L HDTV40A User Manual For HDTV Set-Top Boxes with DVI: 1. 2. 3. 4. 5. Turn off the power to the HDTV and HDTV Set-Top Box. Using a HDMI-DVI cable, connect the DVI end to your HDTV Set-Top Box and the HDMI end to the HDMI Input (white color area) at the rear of the High Definition TV.
VIZIO® VW32L HDTV40A User Manual 2.3.2 Using Component Video Connecting your HDTV Set-Top Box (Better): 1. 2. 3. 4. 5. 6. 7. 8. Turn off the power to the HDTV and HDTV Set-Top Box. Connect the Y (green color) connector on your HDTV Set-Top Box to the corresponding Y (green color) connector in the Component 1 group (green color area - row of connectors nearest to you when viewing from the rear of the High Definition TV) at the rear of the High Definition TV.
VIZIO® VW32L HDTV40A User Manual 2.4 Connecting Your Basic Set-Top Box 2.4.1 Using Composite Video 1. 2. 3. 4. 5. Turn off the power to the HDTV and Set-Top Box. Using the AV Cable, connect the Video (yellow color) connector on your Set-Top Box to the corresponding Video (yellow color) connector in the AV group (yellow color area) at the rear of the High Definition TV.
VIZIO® VW32L HDTV40A User Manual 2.5 Connecting Your DVD Player You have several options for connecting your DVD player to your VIZIO VW32L HDTV40A; HDMI, Component, AV (S-Video or Composite) inputs. Based on your configuration, you can decide which option is right for you. 2.5.1 Using HDMI DVD players that have a digital interface such as HDMI (High Definition Multimedia Interface) should be connected to the HDMI input of the VIZIO VW32L HDTV40A for optimal results.
VIZIO® VW32L HDTV40A User Manual 2.5.2 For DVD Players with DVI: 1. 2. 3. 4. 5. Turn off the power to the High Definition TV and DVD player. Using a HDMI-DVI cable, connect the DVI end to your DVD player and the HDMI end to the HDMI Input (white color area) at the rear of the High Definition TV.
VIZIO® VW32L HDTV40A User Manual 2.5.3 Using Component Video Connecting your DVD Player (Better): 1. 2. 3. 4. 5. 6. 7. 8. Turn off the power to the High Definition TV and DVD player. Connect the Y (green color) connector on your DVD player to the corresponding Y (green color) connector in the Component 1 group (green color area - row of connectors nearest to you when viewing from the rear of the High Definition TV) at the rear of the High Definition TV.
VIZIO® VW32L HDTV40A User Manual 2.5.4 Using S-Video (AV) Connecting your DVD Player (Good): 1. 2. 3. 4. 5. Turn off the power to the HDTV and DVD player. Connect the S-Video jack on the rear of your DVD player to the S-Video jack in the AV/S-VIDEO group (yellow/red color area) on the back High Definition TV.
VIZIO® VW32L HDTV40A User Manual 2.6 Connecting Your VCR or Video Camera 1. 2. 3. 4. 5. Turn off the HDTV and VCR or Video Camera. Connect the S-Video jack on the rear of your VCR or Video Camera to the S-Video jack in the AV group on the rear side of the High Definition TV.
VIZIO® VW32L HDTV40A User Manual 2.7 Connecting an external Receiver/Amp 2.7.1 Optical Programs Output of Audio received with HD If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical DIGITAL AUDIO OUT (white area) at the rear of the LCD HDTV. This is active when receiving audio with the program being viewed no matter what input is being used. 1. Turn off the power to the LCD HDTV and Receiver/Amp. 2.
VIZIO® VW32L HDTV40A User Manual 2.8 Connecting a PC Computer 1. 2. Turn off the power to the High Definition TV and PC Computer. Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your pc computer and the other end to the RGB PC input (blue area) at the rear of the High Definition TV. Connect the Audio Out on your pc computer to the RGB PC Audio (this connection will require an 1/8” stereo mini plug at the end which goes into the TV) input (blue area) at the rear of the High Definition TV.
VIZIO® VW32L HDTV40A User Manual 2.8.1 Preset PC Resolutions If connecting to a PC through the RGB PC input, set the TV timing mode to VESA 1366x768 at 60Hz for best picture quality (refer to the graphic card’s user guide for questions on how to set this timing mode). Please see the table below for the factory preset resolutions. Resolution Refresh (Hz) H-Freq (kHz) V-Freq (Hz) H-Sync V-Sync Pixel Freq (MHz) 640x480 60 31.47 59.94 N N 25.18 640x480 75 37.50 75.00 N N 31.
VIZIO® VW32L HDTV40A User Manual 2.9 Setting Up to Watch Television For ‘Preparing Your LCD HDTV for Wall Mounting’, see page 6. 2.10 Basic LCD HDTV Start Up 1. Connecting the Power Cable Connect the power cord to the power cord connector on the back of the High Definition TV, and then plug the power cord into an AC wall socket. 2. Connect Audio and Video Cables to the HDTV (see pages 13 ~ 25 for detailed steps) 3.
VIZIO® VW32L HDTV40A User Manual The next screen will display the options to select between Home Mode and Retail Mode, selecting Home Mode will give you an opportunity to save energy. Press the next screen. button on the remote to go to the If Retail Mode is selected by mistake; the next option will allow you to switch your selection back to Home Mode. Press the screen.
VIZIO® c. VW32L HDTV40A User Manual The Channel Scan screen will be displayed; default choice is Scan. Press the button on the remote control to commence the search for available channels to be stored into memory. If you do not want to scan for channels at this time, press the LAST key on the remote control.
VIZIO® VW32L HDTV40A User Manual e. When finished, the Complete screen will be displayed to inform you that the HDTV has completed the Initial Setup. Press the button on the remote control to exit and begin watching TV. 5. Select Input Source Select the Input Source for the HDTV by pressing the INPUT button on the side of the High Definition TV or using the Input button on the remote control.
VIZIO® VW32L HDTV40A User Manual Note: The TV set will be displaying any television station or program selected by the Cable Box, VCR, External Tuner or Satellite Receiver. The TV set will not be able to change programs or channels; this is controlled by the equipment sending the signal. If the service being used is the one which setup includes a box with two different outputs for two different (distant) rooms, then scanning channels would help you to find the signal.
VIZIO® VW32L HDTV40A User Manual e. Press either or button to change the Picture Mode option to Standard. f. Press the LAST key repeatedly to exit the on screen display Menu. Note: If Procedure 4 had been done, you would like to do the following to ensure that the correct program times are shown when pressing the Guide key: Press the MENU button, this will bring up the picture mode menu. Pressing either or button scroll across to the icon showing the little satellite dish or antenna.
VIZIO® VW32L HDTV40A User Manual 2.11 Watching a TV Program Before you start watching TV, please make sure that any cable, satellite or off-air antenna connections are secure. Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge protector. 1. Press the power button on the remote or on the side of the High Definition TV. The VIZIO logo on the front will change from orange to white. 2. There are 3 options for selecting your programming: a.
VIZIO® VW32L HDTV40A User Manual 2.12 Adjusting Basic HDTV Settings Volume To adjust the volume, press and hold the VOL+ or VOLbutton on the side of the LCD HDTV or remote control until the desired level is reached. TV Channels To step up or down through the available TV channels, press the CH+ or CH- button on the side of the HDTV or remote control once for the next or previous channel, or hold it depressed until the desired channel is reached.
VIZIO® VW32L HDTV40A User Manual Chapter 3 Advanced Adjustment of HDTV 3.1 Using the On Screen Display (OSD) The remote control or the control buttons on the right hand side of the High Definition TV can control all the function settings. The On Screen Display (OSD) allows you to adjust the save contrast, brightness and other settings. The TV will save changes made to the settings, even if the TV is turned off.
VIZIO® VW32L HDTV40A User Manual 3.2 DTV / TV Input Picture Adjustment 3.2.1 Picture Mode When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the button to highlight the Picture Mode selection. Use the or button to choose from Custom, Standard, Movie and Game. If Standard, Movie or Game is chosen for the Picture Mode, still the Picture adjustments are available for you to set or adjust them to your preferred settings.
VIZIO® VW32L HDTV40A User Manual 3.2.2 Backlight Press the selection. button to highlight the Backlight Press the button to start adjusting the brightness of the Backlight and the menu page will disappear and be replaced by a small Backlight Indicator Bar so you can see the light level between the minimum and maximum available levels. Use the or button to adjust the level.
VIZIO® VW32L HDTV40A User Manual 3.2.4 Contrast Press the button to highlight the Contrast selection. Press the button to start adjusting the contrast and the menu page will disappear and be replaced by a small Contrast Indicator Bar so you can see the contrast level between the minimum and maximum available levels. Use the or button to adjust the level. The Contrast adjusts the white levels in the picture.
VIZIO® VW32L HDTV40A User Manual 3.2.7 Sharpness Press the button to highlight the Sharpness selection. Press the button to start adjusting the sharpness and the menu page will disappear and be replaced by a small Sharpness Indicator Bar so you can see the sharpness level between the minimum and maximum available levels. Use the or button to adjust the level. The Sharpness adjusts the sharpness of the picture.
VIZIO® VW32L HDTV40A User Manual 3.2.9 Advanced Video Press the button to highlight the option for Advanced Video selection. Press the MENU button. A new menu will be displayed showing the advanced functions available for fine tuning of the picture. DNR Press the button to highlight DNR (Dynamic Noise Reduction). Use this feature to diminish picture artifacts caused by the digitizing of image motion content that may be present in the picture.
VIZIO® VW32L HDTV40A User Manual CTI Press the button to highlight CTI (Color Transient Improvement). This feature can be used to reduce the time taken to transition from one color to another. The effect will be seen as sharpening the border between colors. Press the or button to choose from the Off, Low, Medium or Strong setting. Press the LAST key once to return to the previous screen or repeatedly to return to your program if task has been completed.
VIZIO® VW32L HDTV40A User Manual 3.3 DTV / TV Input Audio Adjustment 3.3.1 Volume When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the button to display the AUDIO ADJUST page. Press the button to highlight the Volume selection. Press the button to start adjusting the volume and the menu page will disappear and be replaced by a small Volume Indicator Bar so you can see the volume level between the zero and maximum available levels.
VIZIO® VW32L HDTV40A User Manual 3.3.3 Treble Press the button to highlight the Treble selection. Press the button to start adjusting the treble and the menu page will disappear and be replaced by a small Treble Indicator Bar, as before, so you can see the treble level between the zero and maximum available levels. Use the or button to adjust for treble boost or attenuation. Press the LAST key once to return to the previous screen or repeatedly to return to your program if task has been completed. 3.3.
VIZIO® VW32L HDTV40A User Manual 3.3.6 Digital Audio Out Press the button to highlight the Digital Audio Out selection. Press the or button to make the proper selection. The options being Dolby Digital, PCM and OFF. Press the LAST key once to return to the previous screen or repeatedly to return to your program if task has been completed. 3.3.7 Speakers Press the button to highlight the Speakers selection. Press either or button to turn the internal speakers On or Off.
VIZIO® VW32L HDTV40A User Manual 3.4 DTV / TV Tuner Setup When you first used your VIZIO VW32L HDTV40A you will have setup your TV for DTV / TV channels using the Initial Setup screens. If you did not do this or if your setup has changed, you can do this from the TV TUNER SETUP menu. 3.4.1 Tuner Mode When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the button to display the TV page. Press the button to highlight the Tuner Mode selection.
VIZIO® VW32L HDTV40A User Manual 3.4.4 MTS This feature allows you, the user to select the different languages in which the signal provider or broadcaster is transmitting the audio with the program you are watching. This signal is usually or in most cases Spanish language. Press the button as many times as it takes to scroll down to this option and get it highlighted. Press either or button to go through the settings of this feature to make your selection.
VIZIO® VW32L HDTV40A User Manual 3.5 DTV / TV Input Setup 3.5.1 Language When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the button until the SETUP page is displayed. Press the button to highlight the Language selection. The default is English. Press either or button to select Español or Français. Press the LAST key once to return to the previous screen or repeatedly to return to your program if task has been completed. 3.5.
VIZIO® VW32L HDTV40A User Manual 3.5.4 Input Naming This feature has been added to facilitate you, the user in identifying or label the input and signal which is being watched. You could use up to 8 characters; either letters or numbers or combinations of both. Press button to highlight this option. Press button to obtain the next screen which shows the different inputs. Press button to select the desired input which you want to label or name (Examples: VCR, DVD,.., etc.
VIZIO® VW32L HDTV40A User Manual 3.5.5 Closed Caption (CC) When watching regular analog (NTSC) TV, the Analog CC feature is available in the Setup menu. Press the button to highlight the Analog CC selection. Press the button to select CC1, CC2, CC3 or CC4. Press the LAST key once to return to the previous screen or repeatedly to return to your program if task has been completed. Closed Caption for regular TV is usually CC1 or CC2. 3.5.
VIZIO® VW32L HDTV40A User Manual 3.5.7 System Reset Press the button to highlight the System Reset. Press the button to go to next screen. Press the button to select either Setup Wizard or Reset All Settings. Selecting Setup Wizard brings up the Initial Setup procedure described on pages 28 through 30. Selecting Reset All Settings brings the TV up the settings of all features and options to manufacturer’s values.
VIZIO® VW32L HDTV40A User Manual DTV / TV Input Parental Control 3.5.8 Channel Block If you want to restrict certain channel and program viewing, you can do this by turning on the Parental Control. Selected programs, movies and channels can then be made available only after an authorized password has been entered and accepted by the TV. When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the button to display the PARENTAL page.
VIZIO® VW32L HDTV40A User Manual Press the button to highlight the Channel Block selection. Press the button to go to the next screen. Press the LAST key once to return to the previous screen or repeatedly to return to your program if task has been completed. 3.5.9 US TV Rating Follow the procedure in the previous section 3.5.8 to display the Parental Control menu and then press the button to highlight the TV Rating selection. Press the button and the Block TV Rating panel will be displayed.
VIZIO® VW32L HDTV40A User Manual 3.5.10 US Movie Rating (For US) Press the button to highlight the US Movie Rating selection. Press the button and the Block Movie Rating panel will be displayed.
VIZIO® VW32L HDTV40A User Manual 3.5.12 Canadian French Rating Press the button to highlight the Canadian French Rating selection. Press the button and the Block Canadian French Rating panel will be displayed.
VIZIO® VW32L HDTV40A User Manual 3.5.14 Blocked Unrated Programming Follow the procedure in the previous section 3.5.8 to display the Parental Control menu and then press the button to highlight the Block Unrated TV selection. Press either or button to select YES or NO to block programs that do not have a rating. Press the LAST key once to return to the previous screen or repeatedly to return to your program if task has been completed. 3.5.
VIZIO® 3.6 HDMI Input Picture Adjustment The Picture Adjust menu operates in the same way for the HDMI Input as for the DTV / TV input in section 3.3. The menu difference is that there is no icon along the top for DTV / TV or Parental Control adjustments. 3.7 HDMI Input Audio Adjustment The Audio Adjust menu operates in the same way for the HDMI Input as for the DTV / TV input in section 3.3. The menu difference is that there is no icon along the top for DTV / TV or Parental Control adjustments. 3.
VIZIO® 3.9 Video Input Picture Adjustment The Picture Adjust menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 3.23. The menu difference is that there is no icon along the top for DTV / TV adjustments. 3.10 Video Input Audio Adjustment The Audio Adjust menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 3.3. The menu difference is that there is no icon along the top for DTV / TV adjustments.
VIZIO® 3.11 Video Input Setup The Setup menu operates in the same way for Video Inputs (Component and AV) as for the DTV/TV input in section 3.3. The menu difference is that there is no icon along the top for TV adjustments. 3.12 Video Input Parental Control The Parental Control menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 3.5. The menu difference is that there is no icon along the top for DTV / TV adjustments. Version 10/17/2008 58 www.VIZIO.
VIZIO® VW32L HDTV40A User Manual 3.13 PC Input Picture Adjustment The Picture Adjust menu operates in the same way for the PC Input as for the DTV / TV input in section 3.2 for Backlight, Contrast, Brightness and Color Temperature. 3.13.1 Auto Adjust When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the button to highlight the Auto Adjust selection. Press the button for the LCD HDTV to adjust to the PC signal timing automatically.
VIZIO® VW32L HDTV40A User Manual 3.13.3 Brightness Press the button to highlight the Brightness selection. Press the button to start adjusting the brightness and the menu page will disappear and be replaced by a small Brightness Indicator Bar so you can see the brightness level between the minimum and maximum available levels. Use the or button to adjust the level. Press the LAST key once to return to the previous screen or repeatedly to return to your program if task has been completed.
VIZIO® VW32L HDTV40A User Manual 3.13.5 Color Temperature Press the button to highlight the option for Color Temperature selection. The default is COOL; this is the 9300K setting. Press the or button if you want to choose the Normal, Warm or Custom option. If you choose the Custom option, then a new menu will be displayed showing the primary color items, Red, Green and Blue. Press the button to highlight the color you wish to adjust.
VIZIO® VW32L HDTV40A User Manual 3.13.8 V. Position Press the button to highlight the Vertical Shift selection. Press the button to start adjusting the vertical position of the picture. Use the or button to adjust the vertical position. Press the LAST key once to return to the previous screen or repeatedly to return to your program if task has been completed. 3.13.9 Fine Tune Press the button to highlight the Fine Tune selection. Press the button to start tuning the to the PC signal.
VIZIO® VW32L HDTV40A User Manual 3.16 Understanding Viewing Features Your HDTV features the following viewing modes, see page 34 for details. 3.16.1 Viewing Modes Normal Mode The original 4:3 aspect ratio (1.33:1 source) is preserved, so black bars are added to the left and right of the display image. Standard TV broadcasts are displayed with a 4:3 Aspect Ratio. Movies in 4:3 Aspect Ratio may be referred to as pan-and-scan or full frame.
VIZIO® VW32L HDTV40A User Manual 3.17 Using a Cable or Satellite Remote Your VIZIO remote uses codes 11758 and 10178 to work your LCD HDTV. To use a cable or satellite remote to work the LCD HDTV, refer to your cable or satellite remote user guide for more information on how to program the remote. If your cable or satellite remote uses a 5-digit code (like most Direct TV units), first try 11758 and then, if that does not work, 10178.
VIZIO® VW32L HDTV40A User Manual 4.2 TV and Stand Base Assembly If the original instructions had been misplaced or lost, the following steps are a duplicate of such document, removing the Stand Base may be the only steps to be done at this point. NOTE: It is strongly recommended that two people perform the setup and assembly due to the weight and size of the TV. To unpack the TV and stand base The following steps are required to assemble the two parts: Stand Neck 1.
VIZIO® VW32L HDTV40A User Manual 4.3 Troubleshooting Guide If the TV fails or the performance changes dramatically, check the display in accordance with the following instructions. Remember to check the peripherals to pinpoint the source of the failure. If the display still fails to perform as expected, contact the VIZIO for assistance by calling 1-(877) 698-4946 or e-mail us at techsupport@vizio.com. Problem Solution No power. Make sure the power button is ON (White VIZIO Logo).
VIZIO® Problem VW32L HDTV40A User Manual Solution If you are using TV, AV-C, AV-S or Component with 480i input, follow steps on page 33 on how to set the WIDE screen modes. You can see a picture but you cannot hear sound. Make sure that the volume is not turned down. Make sure that the sound is not muted. Make sure that your audio input source cables are connected securely and correctly. The TV has pixels that are always dark or colored.
VIZIO® VW32L HDTV40A User Manual 4.5 Compliance Caution: Always use a power cable that is properly grounded. Please use the AC cords listed below for each area. USA Canada Germany UK Japan UL CSA VDE BASE/BS Electric Appliance Control Act 4.6 FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
VIZIO® VW32L HDTV40A User Manual Chapter 5 Miscellaneous Information 5.1 Specifications Specifications Product specifications may change without notice or obligation. Panel 32” (31.5” Diagonal viewing area), 16:9 Aspect Ratio Resolution 1366 x 768 pixels Pixel (Dot) Pitch 0.5107mm (H) x 0.5107mm (V) Display Compatibility 720P (HDTV) Colors 16.
VIZIO® VW32L HDTV40A User Manual 5.2 Glossary – Standard Definitions Analog TV: Today’s TV system using radio frequency waves to transmit and display pictures and sound. Aspect Ratio (4x3): Traditional TV “aspect ratio”, that is, the screen’s width as compared to its height. For example, a “32 inch TV screen” would be 25 inches wide and 19 inches tall. Aspect Ratio (16x9): “Wide screen TV” aspect ratio which is more like a movie screen than a traditional TV.
VIZIO® VW32L HDTV40A User Manual 5.
VIZIO® P Parental Control Block Unrated Programming, 56 Canadian English Rating, 54 Canadian French Rating, 55 Channel Block, 52 Check for New DTV Rating, 55 Movie Rating, 54 Password change, 56 TV Rating, 53 PC Input Audio Adjustment, 63 Picture Adjustment, 60 Setup, 63 PC Picture Adjust Auto Adjust, 60 Fine Tune, 63 Horizontal Position, 62 Horizontal Size, 62 Vertical Position, 63 PC Resolutions, 26 R Remote, 11 Batteries, 12 Range, 12 Remote Control Using your Cable or Satellite Remote to Operate your
VIZIO® VW32L HDTV40A User Manual VIZIO LIMITED PRODUCT WARRANTY VIZIO provides a “ONE-YEAR LIMITED WARRANTY” against manufacturing defects in materials and workmanship to the original purchaser of a new VIZIO display purchased from an authorized VIZIO U.S. reseller and used in the fifty (50) United States or Puerto Rico. VIZIO’s Responsibility VIZIO displays purchased new from an authorized VIZIO U.S.
VIZIO® VW32L HDTV40A User Manual display for commercial purposes or in applications or uses for which the display is not intended is not covered by this limited warranty. “Image Sticking”, caused by static images on the screen for extended periods and or excessive brightness and contrast levels, is not covered by this limited warranty. Installation, removal, transportation and reinstallation of a display, and routine maintenance and cleaning, are not covered by this limited warranty.
VIZIO® VW32L HDTV40A User Manual VIZIO RETURN POLICY VIZIO’s return policy allows for products purchased directly from VIZIO to be returned by the original purchaser during the initial thirty (30) day period following the date of purchase. A VIZIO return authorization number must first be obtained as provided below. The refund will be the purchase price actually paid by the purchaser less a ten percent (10%) restocking fee per each item returned. Shipping and handling are not refundable.
VIZIO® VW32L HDTV40A User Manual Warranty Replacement generally is performed on displays which are determined to be economically unrepairable.
