MODEL VSB202 VIZIO QUICK START GUIDE
IMPORTANT SAFETY INFORMATION Your Sound Bar is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent your Sound Bar from being damaged, the following rules should be observed for its installation, use, and maintenance. Please read the following safety instructions before operating your Sound Bar. Keep these instructions in a safe place for future reference.
PACKAGE CONTENTS High Definition Sound Bar Remote Control with Battery Stereo RCA to 3.5mm Audio Cable Power Adapter w/Cable This Quick Start Guide Digital Optical Audio Cable Cables may vary slightly from those shown.
CONTROLS & CONNECTIONS Input Press to change input source (Input 1, Input 2). Power Press to turn Sound Bar on or off. Volume + / Press to increase/ decrease system volume. Input Vol - Mute Press to turn sound off. Press again to turn sound on. Mute Vol + Optical Input 1 TVOL TVOL Press to turn SRS TruVolume on or off. TSHD Input 2 24V Optical Input 1 Input 2 24V SPDIF (Digital Optical) Power Port Input 1 (Stereo RCA) Input 2 (Stereo 3.
FIRST-TIME SETUP 1 Optical Input 1 Input 2 24V BACK OF SOUND BAR BETTER - Digital GOOD - Analog CHOOSE ONE Connect the included Optical Cable or the included Stereo RCA Cable to ONE TV audio output as shown. The included 3.5mm to RCA cable is reversible. You can connect to either a 3.5mm port or an RCA port on your TV. BACK OF YOUR TV* *Not all TVs have the audio outputs shown above.
2 Optical 24V Optical Input 1 Input 2 24V 3 4 Input 1 Input 2
5 Sound Bar is centered below the TV. For the best surround sound experience, position the Sound Bar as shown.* The Sound Bar should be close to ear level.
6 Turn your TV on, then press the Power button on the remote to turn the Sound Bar on. Power Press the Input button to switch between audio sources. For example, if you connected your TV to Input 1, set the Sound Bar to Input 1. Input Setup is complete. READING THE INDICATOR LIGHTS Volume (White) As volume increases, more lights are displayed. Lights are located here. SRS TruSurround HD (Blue) When TruSurround HD is on, light is solid.
USING THE REMOTE Power Press to turn on or off. Input Press to change input source. Volume Up Press to increase volume. Volume Down Press to decrease volume. Mute Press to mute/unmute. TVOL Press to activate SRS TruVolume. TSHD Press to activate SRS TruSurround HD or SRS WOW HD. Tip: For best results, point the remote at the right side of the Sound Bar. The sensor is located there. If your remote stops responding, you may need to replace the battery.
WALL MOUNTING THE SOUND BAR 1 Remove the screw from the Sound Bar stands and rotate as shown. 26 3/4” (67.95 cm) 2 Be sure your screws are attached to wood studs or drywall anchors (for drywall) or concrete anchors (for brick/concrete walls). Wall mounting hardware is not included. If you are unfamiliar with power tools or the layout of electrical wiring in the walls of your home, consult a professional installer. Mounting hardware not included. Reattach stands using the included screw.
HELP & TROUBLESHOOTING All VIZIO products include FREE lifetime technical support. The VIZIO support team is highly trained and is based in the United States. We can help with: • • • • Product Setup Technical Problems Warranty Questions And More Hours of operation: Monday - Friday: 5 AM TO 9 PM (PST) Saturday - Sunday: 8 AM TO 4 PM (PST) Phone: (877) 698-4946 (TOLL-FREE) Email: techsupport@VIZIO.com Web: www.VIZIO.com/support There is no power.
VIZIO RECOMMENDS ULTIMATE ENTERTAINMENT Complete your home theater experience! The VIZIO 3D Blu-ray Player with Wireless Internet Apps delivers full HD video, 7.1 surround sound and has built-in wireless for easy access to online movies, TV, music and more.
AVAILABLE ON VIZIO.COM THE SIMPLE SOLUTION Replace up to three remotes with the VIZIO 3 Device Universal Remote Control. It uses a clever code search mode to find your device without any manual setup. It’s also fully backlit to help you find the right buttons in the dark.
ONE-YEAR LIMITED WARRANTY ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90) days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option and discretion.
LEGAL & COMPLIANCE FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
© 2012 VIZIO INC. ALL RIGHTS RESERVED.
