Projection Television User Manual

VIZIO VO320E User Manual
Version 1/22/2009 23
www.VIZIO.com
STEREO SYSTEM
Connecting an external Receiver/Amp
1. Turn off the power to the HDTV and Receiver/Amp.
2. Using an audio cable (white and red connectors), connect the
cable to the audio input connectors on the Receiver/Amp and
connect the other end to the AUDIO OUT (white area) audio
connectors at the rear of the HDTV.
3. Turn on the power to the HDTV and Receiver/Amp.
4. Then press the MENU button on the remote control to open
the On-Screen Display (OSD) menu.
5. Press # button on the remote control to select the Audio
menu.
6. Press
" on the remote control to select SPEAKERS.
7. Press # on the remote control to select OFF so that the sound
from the HDTV will now be routed through your Receiver/Amp
system.
Note:
! Refer to your Receiver/Amp user manual to select the
corresponding audio input.
! The audio output is not amplified and cannot be connected directly to external speakers.
Optical Output of Audio received with HD Programs
If your sound system has a SPDIF (optical) digital audio input you can connect it to the OPTICAL
digital audio out (white area) at the rear of the HDTV. This is active when receiving audio with the
programs being viewed no matter what input is being used.