Projection Television User Manual

VIZIO VO320E User Manual

www.VIZIO.com

Chapter 1 Basic Controls and Connections

Front Panel

1. POWER ‘VIZIO’ LIGHT–

The VIZIO name lights white

when powered on and orange

when powered off.

2. REMOTE CONTROL

SENSOR – This is the

window through which all of

the remote control signals

pass to the sensor. Point the

remote control directly at this

window for the best response

to the remote signal.

Side Panel Controls

POWER ( ) – Switch the HDTV on by pressing the button once. Press the

button again to the HDTV off.

MENU – This button activates the On Screen Display (OSD). If a sub-menu is

active, pressing this button will proceed to the next level.

CH + / - – Use these buttons to step up or down the TV channels. While the OSD is

active, these buttons function as up and down controls in the OSD menus.

VOL + / - – Use these buttons to increase or decrease to the speaker volume.

While the OSD is active, these buttons function as left and right controls in the OSD

menus.

INPUT (ENTER) – Repeated pressing of this buttons steps

through the input sources in the following sequence: TV,

AV1/S-Video, AV2, Component1, Component2, RGB, HDMI 1,

and HDMI 2. Once you have stepped through the entire

sequence, you will return to the beginning. If a sub-menu is

active, pressing this button will return to the previous menu

level.

Additionally, when the OSD is active, this button confirms the

menu function to be adjusted. When the OSD is not active, pressing this button will display the current

input mode.